This archive describes wastewater and sewage transfer techniques commonly used in systems with no transfer, small bore / settled storage transfer, conventional sewerage system transfer, and drainage field transfer.
Have you ever wondered what happens to water and other substances when they are flushed down our drains and toilets? It shouldn’t be a mystery, and the City of Windsor and the Detroit River Canadian Cleanup initiative have partnered to create a wastewater video to help de-mystify the topic, and educate viewers.
Video describes issues with public sewer systems, items that cause blockages and clogs. Protecting against overloading of municipal waste systems. How pharmaceuticals and chemicals cause problems in municipal systems and storm drains which flow out to rivers.
Primary treatment In the primary sedimentation stage, sewage flows through large tanks, commonly called “pre-settling basins”, “primary sedimentation tanks” or “primary clarifiers”.[9] The tanks are used to settle sludge while grease and oils rise to the surface and are skimmed off. Primary settling tanks are usually equipped with mechanically driven scrapers that continually drive the collected sludge towards a hopper in the base of the tank where it is pumped to sludge treatment facilities.[7]:9-11 Grease and oil from the floating material can sometimes be recovered for saponification. Screening: The influent sewage water passes through a bar screen to remove all large objects like cans, rags, sticks, plastic packets etc. carried in the sewage stream.[6] This is most commonly done with an automated mechanically raked bar screen in modern plants serving large populations, whilst in smaller or less modern plants, a manually cleaned screen may be used. The raking action of a mechanical bar screen is typically paced according to the accumulation on the bar screens and/or flow rate. The solids are collected and later disposed in a landfill, or incinerated. Bar screens or mesh screens of varying sizes may be used to optimize solids removal. If gross solids are not removed, they become entrained in pipes and moving parts of the treatment plant, and can cause substantial damage and inefficiency in the process.[7]:9 Grit removal: Pretreatment may include a sand or grit channel or chamber, where the velocity of the incoming sewage is adjusted to allow the settlement of sand, grit, stones, and broken glass. These particles are removed because they may damage pumps and other equipment. For small sanitary sewer systems, the grit chambers may not be necessary, but grit removal is desirable at larger plants.[7] Grit chambers come in 3 types: horizontal grit chambers, aerated grit chambers and vortex grit chambers. Source of the article published in description is Wikipedia.
Loading...