Rain Brothers LLC
Published on May 22, 2015
We ( www.rainbrothers.com )specialize in rainwater harvesting systems used for drinking water. This is an overview of a residential project here in Ohio. The site had just been inspected by the Health Department, so we had all our trenches open and thought it would be a good opportunity to put together a video for reference.
It is important to note that we typically do not make hard connections to the tank (either with the pump supply line or the tank inlet and outlet) until the tank has been backfilled and compacted to the levels of the pipe connections. However, this particular county health department inspector requested that the pit be exposed and the connections be made for the inspection. Also, you’ll see that there is water in the pit under the tank. This is groundwater that seeped in during excavation…. It was not put there by us and, no, we don’t have a cracked or leaking tank.
EasyOn Gutter Guard is used to keep leaves, redwood tree needles and roof sand grit out of the gutter and a huge 15,000 gallon rainwater catchment system for a homeowner in California.
EasyOn are Do-It-Yourself (DIY) gutter guards that can be installed on any gutter and roof type. They are made from a fine surgical stainless steel micromesh and anodized aluminum frame. 2,500 holes per square inch keeps out all the fine debris.
1 Person water Tank install 22,000 Litre 5000 Gallon how to do it by yourself Andy Thomsen EP.46
Wessex Water
Published on Oct 17, 2012
SUBSCRIBE 632
Some of our water supply projects involve building a new storage tank.
Loading...
Loading...
Loading...
Loading...